Epiroc MT2200

Technical data by generation and configuration: engine, cooling, refill capacities and the manufacturer's public documents.

Epiroc MT2200 · Cummins QSL9 Tier 3

EPA Tier 3 (standard)

Engine	Engine	Cummins QSL9 · 242 kW (325 hp) at 2,100 rpm · 1,424 Nm	Standard
Engine	Engine brake	Compression type	Standard
Cooling	Corrosion-resistant radiator	Optional	Optional
Transmission	Drive	Dana 6000 series, 4-speed forward/reverse powershift; single-stage converter with automatic lock-up	Standard
Axles	Axles	Okubo Rock Tough 457; open differentials; front oscillation 20°	Standard
Brakes	Brakes	Fully enclosed, force-cooled wet multiple discs at each wheel; SAHR	Standard
Hydraulics	Hydraulic system	15.5 MPa · 223 L tank · gear pumps	Standard
Tires	Tires	18.00R25	Standard
Electrical	Electrical system	24 V with 24/12 V converter · 140 A alternator	Standard
Fuel	Fuel tank	379 L	Standard
Dump box	Payload	22,000 kg	Standard
Dump box	Body	7.9 to 12.3 m³ (with or without tailgate; optional Teletram box)	Standard

Alternative · China MEP CS IV

Engine	Engine	Cummins L9 · 254 kW (340 hp) at 2,100 rpm · 1,526 Nm	Standard
Engine	Engine brake	Compression type	Standard
Cooling	Corrosion-resistant radiator	Optional	Optional
Transmission	Drive	Dana 6000 series, 4-speed forward/reverse powershift; single-stage converter with automatic lock-up	Standard
Axles	Axles	Okubo Rock Tough 457; open differentials; front oscillation 20°	Standard
Brakes	Brakes	Fully enclosed, force-cooled wet multiple discs at each wheel; SAHR	Standard
Hydraulics	Hydraulic system	15.5 MPa · 223 L tank · gear pumps	Standard
Tires	Tires	18.00R25	Standard
Electrical	Electrical system	24 V with 24/12 V converter · 140 A alternator	Standard
Fuel	Fuel tank	379 L	Standard
Dump box	Payload	22,000 kg	Standard
Dump box	Body	7.9 to 12.3 m³ (with or without tailgate; optional Teletram box)	Standard

Epiroc: Minetruck MT2200 technical specification (9869 0083 01e, 2024)

Real evaluations from the MESABI® workshop. We do not show customer data or equipment nameplates.

evaluations and workshop services

repairable according to the diagnosis

Components evaluated

Cooling system

Impacts on the structural frame

Structural frame

2×

Observed condition: Impacts and deformation of the structural frame.
Technical risk: Loss of stiffness and transfer of stress to the core.
Recommended action: Straighten, inspect dimensionally and apply a protective coating.

Contamination

Core

1×

Impacts on the core

Core

1×

Observed condition: Impacts and localized deformation of the core.
Technical risk: Reduced effective heat-transfer area and cooling capacity.
Recommended action: Straighten fins in recoverable areas; replace tubes or modules with irreversible damage.

Dirt build-up in the core

Core

1×

Observed condition: Dirt build-up and contamination between the core rows.
Technical risk: Blocked air flow, overheating and loss of efficiency.
Recommended action: Deep cleaning with a method that does not deform the fins.

No guard

Guard

1×