Skip to Content

Sullair LS-200S

Technical data by generation and configuration: engine, cooling, refill capacities and the manufacturer's public documents.

Sullair LS-200S · 60 Hz

LS-200S generation (before the current LS series) · 60 Hz
Controller Controller Supervisor (microprocessor) Standard
Electric motor Engine Premium Efficient electric · 200 hp (149 kW) Standard
Electric motor Motor Premium Efficient, direct-coupled and flange-mounted to the air end (no belts) Standard
Screw element and drive Compression element Sullair single-stage screw with variable-capacity spiral valve Standard
Air intake Intake filter OptimalAir (0.4 micron), with remote air intake connection Standard
Separator and oil circuit Air/fluid separation Multi-stage: dual nested Optimizer elements; less than 1 ppm carryover Standard
Separator and oil circuit Fluid filter Fiberglass Standard
Separator and oil circuit Fluid Sullube, 10,000 h synthetic Standard
Coolers Air-cooled version Updraft coolers, easy to install and suitable for heat recovery Standard
Coolers Water-cooled version Shell-and-tube heat exchanger Optional
Coolers Aftercooler Integrated, with moisture separator and electric drain Standard
Flow and pressure Full-load capacity 980 acfm (27.7 m³/min) at 100 psi · 768 acfm (21.7 m³/min) at 150 psi Standard
Flow and pressure Maximum working pressure 175 psi (12 bar) Standard
Package Dimensions (length × width × height) 3,048 × 1,828 × 1,727 mm Standard
Package Weight 3,379 kg Standard

Sullair LS-200S · 50 Hz

LS-200S generation · 50 Hz
Controller Controller Supervisor (microprocessor) Standard
Electric motor Engine Premium Efficient electric · 200 hp (149 kW) Standard
Electric motor Motor Premium Efficient, direct-coupled and flange-mounted to the air end (no belts) Standard
Screw element and drive Compression element Sullair single-stage screw with variable-capacity spiral valve Standard
Air intake Intake filter OptimalAir (0.4 micron), with remote air intake connection Standard
Separator and oil circuit Air/fluid separation Multi-stage: dual nested Optimizer elements; less than 1 ppm carryover Standard
Separator and oil circuit Fluid filter Fiberglass Standard
Separator and oil circuit Fluid Sullube, 10,000 h synthetic Standard
Coolers Air-cooled version Updraft coolers, easy to install and suitable for heat recovery Standard
Coolers Water-cooled version Shell-and-tube heat exchanger Optional
Coolers Aftercooler Integrated, with moisture separator and electric drain Standard
Flow and pressure Full-load capacity 951 acfm at 100 psi · 791 acfm at 150 psi Standard
Flow and pressure Maximum working pressure 175 psi (12 bar) Standard
Package Dimensions (length × width × height) 3,048 × 1,828 × 1,727 mm Standard
Package Weight 3,379 kg Standard

Sources

Sullair: 200-350 hp single-stage compressor brochure (SAPSS200350201803-3, 2018) on sullair.com. The catalog lists it as LS200 and LS200S; both are treated as the same model

Other models in this family

Other machine explorers

Data may vary by year, serial number and options of each machine; confirm them with your machine's manual.

Caterpillar, Sandvik, Epiroc, Komatsu and other brands mentioned are the property of their respective owners. MESABI® is not affiliated with them; they are mentioned only to identify the equipment.